// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca953x.dtsi" #include #include #include / { compatible = "tplink,tl-mr3420-v3", "qca,qca9531"; model = "TP-Link TL-MR3420 v3"; aliases { led-boot = &led_system; led-failsafe = &led_system; led-running = &led_system; led-upgrade = &led_system; label-mac-device = &wmac; }; led_spi { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; mosi-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; led_gpio: led_gpio@0 { compatible = "fairchild,74hc595"; reg = <0>; gpio-controller; #gpio-cells = <2>; registers-number = <1>; spi-max-frequency = <10000000>; }; }; gpio-export { compatible = "gpio-export"; gpio_shift_register_oe { gpio-export,name = "tp-link:oe:sr"; gpio-export,output = <0>; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; gpio_shift_register_reset { gpio-export,name = "tp-link:reset:sr"; gpio-export,output = <1>; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; led_system: system { label = "green:system"; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; default-state = "on"; }; lan4 { label = "green:lan4"; gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; }; lan3 { label = "green:lan3"; gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; }; lan2 { label = "green:lan2"; gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; }; lan1 { label = "green:lan1"; gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; }; wan { function = LED_FUNCTION_WAN; color = ; gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; }; wan_fail { function = LED_FUNCTION_WAN; color = ; gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; }; wlan { function = LED_FUNCTION_WLAN; color = ; gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; usb { function = LED_FUNCTION_USB; color = ; gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; trigger-sources = <&hub_port0>; linux,default-trigger = "usbport"; }; qss { label = "green:qss"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "Reset button"; linux,code = ; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; rfkill { label = "RF kill button"; linux,code = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; uboot: partition@0 { label = "u-boot"; reg = <0x000000 0x020000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_uboot_1fc00: macaddr@1fc00 { compatible = "mac-base"; reg = <0x1fc00 0x6>; #nvmem-cell-cells = <1>; }; }; }; partition@20000 { compatible = "tplink,firmware"; label = "firmware"; reg = <0x020000 0x3d0000>; }; art: partition@3f0000 { label = "art"; reg = <0x3f0000 0x010000>; read-only; }; }; }; }; ð0 { status = "okay"; phy-handle = <&swphy4>; nvmem-cells = <&macaddr_uboot_1fc00 1>; nvmem-cell-names = "mac-address"; }; ð1 { nvmem-cells = <&macaddr_uboot_1fc00 0>; nvmem-cell-names = "mac-address"; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; nvmem-cells = <&macaddr_uboot_1fc00 0>; nvmem-cell-names = "mac-address"; }; &usb0 { status = "okay"; }; &usb_phy { status = "okay"; };