// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca956x.dtsi" #include #include #include / { compatible = "tplink,archer-c25-v1", "qca,qca9561"; model = "TP-Link Archer C25 v1"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; label-mac-device = ð0; }; led_spi { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; led_gpio: led_gpio@0 { compatible = "fairchild,74hc595"; reg = <0>; gpio-controller; #gpio-cells = <2>; registers-number = <1>; spi-max-frequency = <10000000>; }; }; keys { compatible = "gpio-keys"; wifi { label = "WiFi button"; linux,code = ; gpios = <&gpio 22 GPIO_ACTIVE_LOW>; }; reset { label = "Reset button"; linux,code = ; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; led_power: power { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; default-state = "on"; }; wps { function = LED_FUNCTION_WPS; color = ; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; }; wlan2g { label = "green:wlan2g"; gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; wlan5g { label = "green:wlan5g"; gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wan_green { function = LED_FUNCTION_WAN; color = ; gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; }; wan_amber { function = LED_FUNCTION_WAN; color = ; gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; }; lan1 { label = "green:lan1"; gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; }; lan2 { label = "green:lan2"; gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; }; lan3 { label = "green:lan3"; gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; }; lan4 { label = "green:lan4"; gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; }; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "factory-boot"; reg = <0x000000 0x020000>; read-only; }; partition@20000 { label = "u-boot"; reg = <0x020000 0x010000>; read-only; }; partition@30000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x030000 0x7a0000>; }; config: partition@7d0000 { label = "config"; reg = <0x7d0000 0x010000>; read-only; }; info: partition@7e0000 { label = "info"; reg = <0x7e0000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_info_8: macaddr@8 { compatible = "mac-base"; reg = <0x8 0x6>; #nvmem-cell-cells = <1>; }; }; }; art: partition@7f0000 { label = "art"; reg = <0x7f0000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; cal_art_5000: calibration@5000 { reg = <0x5000 0x844>; }; }; }; }; }; }; &pcie { status = "okay"; wifi@0,0 { compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&cal_art_5000>, <&macaddr_info_8 (-1)>; nvmem-cell-names = "calibration", "mac-address"; }; }; ð0 { status = "okay"; phy-handle = <&swphy4>; nvmem-cells = <&macaddr_info_8 0>; nvmem-cell-names = "mac-address"; }; ð1 { status = "okay"; nvmem-cells = <&macaddr_info_8 1>; nvmem-cell-names = "mac-address"; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; nvmem-cells = <&macaddr_info_8 0>; nvmem-cell-names = "mac-address"; };