// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "qcom-ipq4018-rutx.dtsi"

/ {
	model = "Teltonika RUTX50";
	compatible = "teltonika,rutx50";

	aliases {
		led-boot = &led_rssi0;
		led-failsafe = &led_rssi0;
		led-running = &led_rssi0;
		led-upgrade = &led_rssi0;
		label-mac-device = &gmac;
	};

	soc {
		gpio-export {
			compatible = "gpio-export";
			#size-cells = <0>;

			gpio_modem_reset {
				gpio-export,name = "modem_reset";
				gpio-export,output = <0>;
				gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
			};

			gpio_modem_power {
				gpio-export,name = "modem_power";
				gpio-export,output = <0>;
				gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
			};

			gpio_out_1 {
				gpio-export,name = "sim-select";
				/* 0 = SIM1 ; 1 = SIM2 */
				gpio-export,output = <0>;
				gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
			};

			gpio_in_1 {
				gpio-export,name = "sim-detect";
				gpio-export,input = <0>;
				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
			};
		};

		leds {
			compatible = "gpio-leds";

			led-0 {
				label = "green:sim1";
				gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
			};

			led-1 {
				label = "green:sim2";
				gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
			};

			led-2 {
				label = "green:eth";
				gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
			};

			led-3 {
				label = "green:wifi";
				gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
			};

			led-4 {
				label = "green:3g";
				gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
			};

			led-5 {
				label = "green:4g";
				gpios = <&shift_io 4 GPIO_ACTIVE_HIGH>;
			};

			led-6 {
				label = "green:5g";
				gpios = <&shift_io 3 GPIO_ACTIVE_HIGH>;
			};

			led_rssi0: led-7 {
				label = "green:rssi0";
				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
			};

			led-8 {
				label = "green:rssi1";
				gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
			};

			led-9 {
				label = "green:rssi2";
				gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
			};

			led-10 {
				label = "green:wifi2g";
				gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
			};

			led-11 {
				label = "green:wifi5g";
				gpios = <&shift_io 13 GPIO_ACTIVE_HIGH>;
			};
		};

		spi-gpio {
			compatible = "spi-gpio";
			#address-cells = <1>;
			#size-cells = <0>;

			gpio-sck = <&tlmm 1 GPIO_ACTIVE_HIGH>;
			gpio-mosi = <&tlmm 3 GPIO_ACTIVE_HIGH>;
			cs-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
			num-chipselects = <1>;

			shift_io: shift_io@0 {
				compatible = "fairchild,74hc595";
				reg = <0>;
				gpio-controller;
				#gpio-cells = <2>;
				/* Attn: This is specific to RUTX50 in Teltonika GPL */
				registers-number = <2>;
				spi-max-frequency = <10000000>;
			};
		};
	};
};

&wifi0 {
	status = "okay";
	qcom,ath10k-calibration-variant = "Teltonika-RUTX10";
};

&wifi1 {
	status = "okay";
	qcom,ath10k-calibration-variant = "Teltonika-RUTX10";
};

&gmac {
	status = "okay";
};

&switch {
	status = "okay";
};

&swport1 {
	status = "okay";

	label = "lan1";
};

&swport2 {
	status = "okay";

	label = "lan2";
};

&swport3 {
	status = "okay";

	label = "lan3";
};

&swport4 {
	status = "okay";

	label = "lan4";
};

&swport5 {
	status = "okay";

	label = "wan";
};