/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 *
 * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
 *
 */

#include "qcom-ipq4019-e2600ac.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	model = "Qxwlan E2600AC c1";
	compatible = "qxwlan,e2600ac-c1";
};

&blsp1_spi1 {
	pinctrl-0 = <&spi_0_pins>;
	pinctrl-names = "default";
	status = "okay";
	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;

	flash@0 {
		reg = <0>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <24000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "0:SBL1";
				reg = <0x0 0x40000>;
				read-only;
			};
			partition@40000 {
				label = "0:MIBIB";
				reg = <0x40000 0x20000>;
				read-only;
			};
			partition@60000 {
				label = "0:QSEE";
				reg = <0x60000 0x60000>;
				read-only;
			};
			partition@c0000 {
				label = "0:CDT";
				reg = <0xc0000 0x10000>;
				read-only;
			};
			partition@d0000 {
				label = "0:DDRPARAMS";
				reg = <0xd0000 0x10000>;
				read-only;
			};
			partition@e0000 {
				label = "0:APPSBLENV";
				reg = <0xe0000 0x10000>;
				read-only;
			};
			partition@f0000 {
				label = "0:APPSBL";
				reg = <0xf0000 0x80000>;
				read-only;
			};
			partition@170000 {
				label = "0:ART";
				reg = <0x170000 0x10000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					macaddr_gmac0: macaddr@0 {
						reg = <0x0 0x6>;
					};

					macaddr_gmac1: macaddr@6 {
						reg = <0x6 0x6>;
					};

					precal_art_1000: precal@1000 {
						reg = <0x1000 0x2f20>;
					};

					precal_art_5000: precal@5000 {
						reg = <0x5000 0x2f20>;
					};
				};
			};
			partition@180000 {
				compatible = "denx,fit";
				label = "firmware";
				reg = <0x180000 0x1e80000>;
			};
		};
	};
};

&wifi0 {
	status = "okay";
	nvmem-cell-names = "pre-calibration";
	nvmem-cells = <&precal_art_1000>;
	qcom,ath10k-calibration-variant = "Qxwlan-E2600AC-C1";
};

&wifi1 {
	status = "okay";
	nvmem-cell-names = "pre-calibration";
	nvmem-cells = <&precal_art_5000>;
	qcom,ath10k-calibration-variant = "Qxwlan-E2600AC-C1";
};

&gmac {
	status = "okay";
};

&switch {
	status = "okay";
};

&swport4 {
	status = "okay";
	label = "sw-eth1";

	nvmem-cell-names = "mac-address";
	nvmem-cells = <&macaddr_gmac0>;
};

&swport5 {
	status = "okay";

	label = "sw-eth2";
	nvmem-cell-names = "mac-address";
	nvmem-cells = <&macaddr_gmac1>;
};