// SPDX-License-Identifier: GPL-2.0-only OR MIT

#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>

/ {
	model = "Extreme Networks WS-AP391x";
	compatible = "extreme-networks,ws-ap391x";

	aliases {
		led-boot = &led_system_green;
		led-failsafe = &led_system_red;
		led-running = &led_system_green;
		led-upgrade = &led_system_red;
	};

	soc {

		tcsr@1949000 {
			compatible = "qcom,tcsr";
			reg = <0x1949000 0x100>;
			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
		};

		ess_tcsr@1953000 {
			compatible = "qcom,tcsr";
			reg = <0x1953000 0x1000>;
			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
		};

		tcsr@1957000 {
			compatible = "qcom,tcsr";
			reg = <0x1957000 0x100>;
			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
		};

	};

	leds {
		compatible = "gpio-leds";

		led_system_green: system_green {
			label = "system:green";
			gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
		};

		/*
		 * system:amber ==> AP3917
		 * system:red ==> AP3916
		 * */
		led_system_red: system_red {
			label = "system:red_or_system:amber";
			gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
		};

		led_wlan24_green: wlan24_green {
			label = "wlan24:green";
			gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0tpt";
		};

		/*
		 * wlan24:amber ==> AP3915/AP3917
		 * pse:green ==> AP3912
		 * */
		led_wlan24_amber: wlan24_amber {
			label = "wlan24:amber_or_pse:green";
			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
		};

		led_wlan5_green: wlan5_green {
			label = "wlan5:green";
			gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1tpt";
		};

		/* iot:blue ==>  AP3917 */
		led_iot_green: iot_green {
			label = "iot:green_or_iot:blue";
			gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
		};

		/* eth:green ==> only AP3912/AP3916 */
		led_eth_green: eth_green {
			label = "eth:green";
			gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
		};

		/*
		 * eth:amber ==> only AP3912/AP3916
		 * usb_enable ==> only AP3915e
		 */
		led_eth_amber: eth_amber {
			label = "eth:amber_or_usb_enable";
			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
		};

		/*
		 * wlan5:amber ==> AP3915/AP3917
		 * cam:green ==> only AP3916
		 */
		led_wlan5_amber: wlan5_amber {
			label = "wlan5:amber_or_cam:green";
			gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
		};

	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART >;
		};
	};
};

&prng {
	status = "okay";
};

&mdio {
	status = "okay";
	pinctrl-0 = <&mdio_pins>;
	pinctrl-names = "default";
};

&crypto {
	status = "okay";
};

&watchdog {
	status = "okay";
};

&usb3_ss_phy {
	status = "okay";
};

&usb3_hs_phy {
	status = "okay";
};

&usb3 {
	status = "okay";
};

&usb2_hs_phy {
	status = "okay";
};

&usb2 {
	status = "okay";
};

&blsp_dma {
	status = "okay";
};

&blsp1_uart1 {
	pinctrl-0 = <&serial_pins>;
	pinctrl-names = "default";
	status = "okay";
};

&cryptobam {
	status = "okay";
};

&qpic_bam {
	status = "okay";
};

&gmac {
	status = "okay";
};

&switch {
	status = "okay";
};

&swport1 {
	status = "okay";
	label = "sw-eth1";
};

&swport2 {
	status = "okay";
	label = "sw-eth2";
};

&swport3 {
	status = "okay";
	label = "sw-eth3";
};

/* "GE2" on AP3917/AP3916/WiNG-AP7662 */
&swport4 {
	status = "okay";
	label = "sw-eth4";
};

/*
 * "GE1" on AP3917/AP3916/AP3915/AP7662
 * "LAN1" on EXTR-AP3912
 */
&swport5 {
	status = "okay";
	label = "sw-eth5";
};

&tlmm {
	mdio_pins: mdio_pinmux {
		mux_1 {
			pins = "gpio6";
			function = "mdio";
			bias-pull-up;
		};
		mux_2 {
			pins = "gpio7";
			function = "mdc";
			bias-pull-up;
		};
	};

	spi_0_pins: spi_0_pinmux {
		pin {
			function = "blsp_spi0";
			pins = "gpio13", "gpio14", "gpio15";
			drive-strength = <12>;
			bias-disable;
		};
		pin_cs {
			function = "gpio";
			pins = "gpio12";
			drive-strength = <2>;
			bias-disable;
			output-high;
		};
	};

	serial_pins: serial_0_pinmux {
		mux {
			pins = "gpio16", "gpio17";
			function = "blsp_uart0";
			bias-disable;
		};
	};
};

&wifi0 {
	status = "okay";
	qcom,ath10k-calibration-variant = "Extreme-Networks-WS-AP3915i";
};

&wifi1 {
	status = "okay";
	qcom,ath10k-calibration-variant = "Extreme-Networks-WS-AP3915i";
};

&blsp1_spi1 {
	pinctrl-0 = <&spi_0_pins>;
	pinctrl-names = "default";
	status = "okay";
	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <24000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			/* Layout for 0x0 - 0xe0000 unknown */

			partition@e0000 {
				label = "CFG1";
				compatible = "u-boot,env-redundant-bool";
				reg = <0xe0000 0x10000>;
				read-only;
			};

			partition@f0000 {
				label = "BootBAK";
				reg = <0xf0000 0x70000>;
				read-only;
			};

			partition@160000 {
				label = "WINGCFG1";
				reg = <0x160000 0x10000>;
				read-only;
			};

			partition@170000 {
				label = "ART";
				reg = <0x170000 0x10000>;
				read-only;
			};

			partition@180000 {
				label = "BootPRI";
				reg = <0x180000 0x70000>;
				read-only;
			};

			partition@1f0000 {
				label = "WINGCFG2";
				reg = <0x1f0000 0x10000>;
				read-only;
			};

			partition@200000 {
				label = "FS";
				reg = <0x200000 0x80000>;
				read-only;
			};

			partition@280000 {
				label = "firmware";
				reg = <0x280000 0xeb0000>;
			};

			partition@1130000 {
				label = "firmware2";
				reg = <0x1130000 0xeb0000>;
			};

			partition@1fe0000 {
				label = "CFG2";
				compatible = "u-boot,env-redundant-bool";
				reg = <0x1fe0000 0x10000>;
				read-only;
			};
		};
	};
};