// SPDX-License-Identifier: GPL-2.0-only #include #include #include #include "rtl83xx.h" static struct rtl838x_switch_priv *switch_priv; extern struct rtl83xx_soc_info soc_info; enum scheduler_type { WEIGHTED_FAIR_QUEUE = 0, WEIGHTED_ROUND_ROBIN, }; int max_available_queue[] = {0, 1, 2, 3, 4, 5, 6, 7}; int default_queue_weights[] = {1, 1, 1, 1, 1, 1, 1, 1}; int dot1p_priority_remapping[] = {0, 1, 2, 3, 4, 5, 6, 7}; static void rtl839x_read_scheduling_table(int port) { u32 cmd = 1 << 9 | /* Execute cmd */ 0 << 8 | /* Read */ 0 << 6 | /* Table type 0b00 */ (port & 0x3f); rtl839x_exec_tbl2_cmd(cmd); } static void rtl839x_write_scheduling_table(int port) { u32 cmd = 1 << 9 | /* Execute cmd */ 1 << 8 | /* Write */ 0 << 6 | /* Table type 0b00 */ (port & 0x3f); rtl839x_exec_tbl2_cmd(cmd); } static void rtl839x_read_out_q_table(int port) { u32 cmd = 1 << 9 | /* Execute cmd */ 0 << 8 | /* Read */ 2 << 6 | /* Table type 0b10 */ (port & 0x3f); rtl839x_exec_tbl2_cmd(cmd); } static void rtl838x_storm_enable(struct rtl838x_switch_priv *priv, int port, bool enable) { /* Enable Storm control for that port for UC, MC, and BC */ if (enable) sw_w32(0x7, RTL838X_STORM_CTRL_LB_CTRL(port)); else sw_w32(0x0, RTL838X_STORM_CTRL_LB_CTRL(port)); } u32 rtl838x_get_egress_rate(struct rtl838x_switch_priv *priv, int port) { if (port > priv->cpu_port) return 0; return sw_r32(RTL838X_SCHED_P_EGR_RATE_CTRL(port)) & 0x3fff; } /* Sets the rate limit, 10MBit/s is equal to a rate value of 625 */ int rtl838x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate) { u32 old_rate; if (port > priv->cpu_port) return -1; old_rate = sw_r32(RTL838X_SCHED_P_EGR_RATE_CTRL(port)); sw_w32(rate, RTL838X_SCHED_P_EGR_RATE_CTRL(port)); return old_rate; } /* Set the rate limit for a particular queue in Bits/s * units of the rate is 16Kbps */ void rtl838x_egress_rate_queue_limit(struct rtl838x_switch_priv *priv, int port, int queue, u32 rate) { if (port > priv->cpu_port) return; if (queue > 7) return; sw_w32(rate, RTL838X_SCHED_Q_EGR_RATE_CTRL(port, queue)); } static void rtl838x_rate_control_init(struct rtl838x_switch_priv *priv) { pr_info("Enabling Storm control\n"); /* TICK_PERIOD_PPS */ if (priv->id == 0x8380) sw_w32_mask(0x3ff << 20, 434 << 20, RTL838X_SCHED_LB_TICK_TKN_CTRL_0); /* Set burst rate */ sw_w32(0x00008000, RTL838X_STORM_CTRL_BURST_0); /* UC */ sw_w32(0x80008000, RTL838X_STORM_CTRL_BURST_1); /* MC and BC */ /* Set burst Packets per Second to 32 */ sw_w32(0x00000020, RTL838X_STORM_CTRL_BURST_PPS_0); /* UC */ sw_w32(0x00200020, RTL838X_STORM_CTRL_BURST_PPS_1); /* MC and BC */ /* Include IFG in storm control, rate based on bytes/s (0 = packets) */ sw_w32_mask(0, 1 << 6 | 1 << 5, RTL838X_STORM_CTRL); /* Bandwidth control includes preamble and IFG (10 Bytes) */ sw_w32_mask(0, 1, RTL838X_SCHED_CTRL); /* On SoCs except RTL8382M, set burst size of port egress */ if (priv->id != 0x8382) sw_w32_mask(0xffff, 0x800, RTL838X_SCHED_LB_THR); /* Enable storm control on all ports with a PHY and limit rates, * for UC and MC for both known and unknown addresses */ for (int i = 0; i < priv->cpu_port; i++) { if (priv->ports[i].phy) { sw_w32((1 << 18) | 0x8000, RTL838X_STORM_CTRL_PORT_UC(i)); sw_w32((1 << 18) | 0x8000, RTL838X_STORM_CTRL_PORT_MC(i)); sw_w32(0x8000, RTL838X_STORM_CTRL_PORT_BC(i)); rtl838x_storm_enable(priv, i, true); } } /* Attack prevention, enable all attack prevention measures */ /* sw_w32(0x1ffff, RTL838X_ATK_PRVNT_CTRL); */ /* Attack prevention, drop (bit = 0) problematic packets on all ports. * Setting bit = 1 means: trap to CPU */ /* sw_w32(0, RTL838X_ATK_PRVNT_ACT); */ /* Enable attack prevention on all ports */ /* sw_w32(0x0fffffff, RTL838X_ATK_PRVNT_PORT_EN); */ } /* Sets the rate limit, 10MBit/s is equal to a rate value of 625 */ u32 rtl839x_get_egress_rate(struct rtl838x_switch_priv *priv, int port) { u32 rate; pr_debug("%s: Getting egress rate on port %d to %d\n", __func__, port, rate); if (port >= priv->cpu_port) return 0; mutex_lock(&priv->reg_mutex); rtl839x_read_scheduling_table(port); rate = sw_r32(RTL839X_TBL_ACCESS_DATA_2(7)); rate <<= 12; rate |= sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)) >> 20; mutex_unlock(&priv->reg_mutex); return rate; } /* Sets the rate limit, 10MBit/s is equal to a rate value of 625, returns previous rate */ int rtl839x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate) { u32 old_rate; pr_debug("%s: Setting egress rate on port %d to %d\n", __func__, port, rate); if (port >= priv->cpu_port) return -1; mutex_lock(&priv->reg_mutex); rtl839x_read_scheduling_table(port); old_rate = sw_r32(RTL839X_TBL_ACCESS_DATA_2(7)) & 0xff; old_rate <<= 12; old_rate |= sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)) >> 20; sw_w32_mask(0xff, (rate >> 12) & 0xff, RTL839X_TBL_ACCESS_DATA_2(7)); sw_w32_mask(0xfff << 20, rate << 20, RTL839X_TBL_ACCESS_DATA_2(8)); rtl839x_write_scheduling_table(port); mutex_unlock(&priv->reg_mutex); return old_rate; } /* Set the rate limit for a particular queue in Bits/s * units of the rate is 16Kbps */ void rtl839x_egress_rate_queue_limit(struct rtl838x_switch_priv *priv, int port, int queue, u32 rate) { int lsb = 128 + queue * 20; int low_byte = 8 - (lsb >> 5); int start_bit = lsb - (low_byte << 5); u32 high_mask = 0xfffff >> (32 - start_bit); pr_debug("%s: Setting egress rate on port %d, queue %d to %d\n", __func__, port, queue, rate); if (port >= priv->cpu_port) return; if (queue > 7) return; mutex_lock(&priv->reg_mutex); rtl839x_read_scheduling_table(port); sw_w32_mask(0xfffff << start_bit, (rate & 0xfffff) << start_bit, RTL839X_TBL_ACCESS_DATA_2(low_byte)); if (high_mask) sw_w32_mask(high_mask, (rate & 0xfffff) >> (32- start_bit), RTL839X_TBL_ACCESS_DATA_2(low_byte - 1)); rtl839x_write_scheduling_table(port); mutex_unlock(&priv->reg_mutex); } static void rtl839x_rate_control_init(struct rtl838x_switch_priv *priv) { pr_info("%s: enabling rate control\n", __func__); /* Tick length and token size settings for SoC with 250MHz, * RTL8350 family would use 50MHz */ /* Set the special tick period */ sw_w32(976563, RTL839X_STORM_CTRL_SPCL_LB_TICK_TKN_CTRL); /* Ingress tick period and token length 10G */ sw_w32(18 << 11 | 151, RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_0); /* Ingress tick period and token length 1G */ sw_w32(245 << 11 | 129, RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_1); /* Egress tick period 10G, bytes/token 10G and tick period 1G, bytes/token 1G */ sw_w32(18 << 24 | 151 << 16 | 185 << 8 | 97, RTL839X_SCHED_LB_TICK_TKN_CTRL); /* Set the tick period of the CPU and the Token Len */ sw_w32(3815 << 8 | 1, RTL839X_SCHED_LB_TICK_TKN_PPS_CTRL); /* Set the Weighted Fair Queueing burst size */ sw_w32_mask(0xffff, 4500, RTL839X_SCHED_LB_THR); /* Storm-rate calculation is based on bytes/sec (bit 5), include IFG (bit 6) */ sw_w32_mask(0, 1 << 5 | 1 << 6, RTL839X_STORM_CTRL); /* Based on the rate control mode being bytes/s * set tick period and token length for 10G */ sw_w32(18 << 10 | 151, RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_0); /* and for 1G ports */ sw_w32(246 << 10 | 129, RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_1); /* Set default burst rates on all ports (the same for 1G / 10G) with a PHY * for UC, MC and BC * For 1G port, the minimum burst rate is 1700, maximum 65535, * For 10G ports it is 2650 and 1048575 respectively */ for (int p = 0; p < priv->cpu_port; p++) { if (priv->ports[p].phy && !priv->ports[p].is10G) { sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_UC_1(p)); sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_MC_1(p)); sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_BC_1(p)); } } /* Setup ingress/egress per-port rate control */ for (int p = 0; p < priv->cpu_port; p++) { if (!priv->ports[p].phy) continue; if (priv->ports[p].is10G) rtl839x_set_egress_rate(priv, p, 625000); /* 10GB/s */ else rtl839x_set_egress_rate(priv, p, 62500); /* 1GB/s */ /* Setup queues: all RTL83XX SoCs have 8 queues, maximum rate */ for (int q = 0; q < 8; q++) rtl839x_egress_rate_queue_limit(priv, p, q, 0xfffff); if (priv->ports[p].is10G) { /* Set high threshold to maximum */ sw_w32_mask(0xffff, 0xffff, RTL839X_IGR_BWCTRL_PORT_CTRL_10G_0(p)); } else { /* Set high threshold to maximum */ sw_w32_mask(0xffff, 0xffff, RTL839X_IGR_BWCTRL_PORT_CTRL_1(p)); } } /* Set global ingress low watermark rate */ sw_w32(65532, RTL839X_IGR_BWCTRL_CTRL_LB_THR); } void rtl838x_setup_prio2queue_matrix(int *min_queues) { u32 v = 0; pr_info("Current Intprio2queue setting: %08x\n", sw_r32(RTL838X_QM_INTPRI2QID_CTRL)); for (int i = 0; i < MAX_PRIOS; i++) v |= i << (min_queues[i] * 3); sw_w32(v, RTL838X_QM_INTPRI2QID_CTRL); } void rtl839x_setup_prio2queue_matrix(int *min_queues) { pr_info("Current Intprio2queue setting: %08x\n", sw_r32(RTL839X_QM_INTPRI2QID_CTRL(0))); for (int i = 0; i < MAX_PRIOS; i++) { int q = min_queues[i]; sw_w32(i << (q * 3), RTL839X_QM_INTPRI2QID_CTRL(q)); } } /* Sets the CPU queue depending on the internal priority of a packet */ void rtl83xx_setup_prio2queue_cpu_matrix(int *max_queues) { int reg = soc_info.family == RTL8380_FAMILY_ID ? RTL838X_QM_PKT2CPU_INTPRI_MAP : RTL839X_QM_PKT2CPU_INTPRI_MAP; u32 v = 0; pr_info("QM_PKT2CPU_INTPRI_MAP: %08x\n", sw_r32(reg)); for (int i = 0; i < MAX_PRIOS; i++) v |= max_queues[i] << (i * 3); sw_w32(v, reg); } void rtl83xx_setup_default_prio2queue(void) { if (soc_info.family == RTL8380_FAMILY_ID) { rtl838x_setup_prio2queue_matrix(max_available_queue); } else { rtl839x_setup_prio2queue_matrix(max_available_queue); } rtl83xx_setup_prio2queue_cpu_matrix(max_available_queue); } /* Sets the output queue assigned to a port, the port can be the CPU-port */ void rtl839x_set_egress_queue(int port, int queue) { sw_w32(queue << ((port % 10) *3), RTL839X_QM_PORT_QNUM(port)); } /* Sets the priority assigned of an ingress port, the port can be the CPU-port */ void rtl83xx_set_ingress_priority(int port, int priority) { if (soc_info.family == RTL8380_FAMILY_ID) sw_w32(priority << ((port % 10) *3), RTL838X_PRI_SEL_PORT_PRI(port)); else sw_w32(priority << ((port % 10) *3), RTL839X_PRI_SEL_PORT_PRI(port)); } int rtl839x_get_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port) { u32 v; mutex_lock(&priv->reg_mutex); rtl839x_read_scheduling_table(port); v = sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)); mutex_unlock(&priv->reg_mutex); if (v & BIT(19)) return WEIGHTED_ROUND_ROBIN; return WEIGHTED_FAIR_QUEUE; } void rtl839x_set_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port, enum scheduler_type sched) { enum scheduler_type t = rtl839x_get_scheduling_algorithm(priv, port); u32 v, oam_state, oam_port_state; u32 count; int i, egress_rate; mutex_lock(&priv->reg_mutex); /* Check whether we need to empty the egress queue of that port due to Errata E0014503 */ if (sched == WEIGHTED_FAIR_QUEUE && t == WEIGHTED_ROUND_ROBIN && port != priv->cpu_port) { /* Read Operations, Adminstatrion and Management control register */ oam_state = sw_r32(RTL839X_OAM_CTRL); /* Get current OAM state */ oam_port_state = sw_r32(RTL839X_OAM_PORT_ACT_CTRL(port)); /* Disable OAM to block traffice */ v = sw_r32(RTL839X_OAM_CTRL); sw_w32_mask(0, 1, RTL839X_OAM_CTRL); v = sw_r32(RTL839X_OAM_CTRL); /* Set to trap action OAM forward (bits 1, 2) and OAM Mux Action Drop (bit 0) */ sw_w32(0x2, RTL839X_OAM_PORT_ACT_CTRL(port)); /* Set port egress rate to unlimited */ egress_rate = rtl839x_set_egress_rate(priv, port, 0xFFFFF); /* Wait until the egress used page count of that port is 0 */ i = 0; do { usleep_range(100, 200); rtl839x_read_out_q_table(port); count = sw_r32(RTL839X_TBL_ACCESS_DATA_2(6)); count >>= 20; i++; } while (i < 3500 && count > 0); } /* Actually set the scheduling algorithm */ rtl839x_read_scheduling_table(port); sw_w32_mask(BIT(19), sched ? BIT(19) : 0, RTL839X_TBL_ACCESS_DATA_2(8)); rtl839x_write_scheduling_table(port); if (sched == WEIGHTED_FAIR_QUEUE && t == WEIGHTED_ROUND_ROBIN && port != priv->cpu_port) { /* Restore OAM state to control register */ sw_w32(oam_state, RTL839X_OAM_CTRL); /* Restore trap action state */ sw_w32(oam_port_state, RTL839X_OAM_PORT_ACT_CTRL(port)); /* Restore port egress rate */ rtl839x_set_egress_rate(priv, port, egress_rate); } mutex_unlock(&priv->reg_mutex); } void rtl839x_set_scheduling_queue_weights(struct rtl838x_switch_priv *priv, int port, int *queue_weights) { mutex_lock(&priv->reg_mutex); rtl839x_read_scheduling_table(port); for (int i = 0; i < 8; i++) { int lsb = 48 + i * 8; int low_byte = 8 - (lsb >> 5); int start_bit = lsb - (low_byte << 5); int high_mask = 0x3ff >> (32 - start_bit); sw_w32_mask(0x3ff << start_bit, (queue_weights[i] & 0x3ff) << start_bit, RTL839X_TBL_ACCESS_DATA_2(low_byte)); if (high_mask) sw_w32_mask(high_mask, (queue_weights[i] & 0x3ff) >> (32- start_bit), RTL839X_TBL_ACCESS_DATA_2(low_byte - 1)); } rtl839x_write_scheduling_table(port); mutex_unlock(&priv->reg_mutex); } void rtl838x_config_qos(void) { u32 v; pr_info("Setting up RTL838X QoS\n"); pr_info("RTL838X_PRI_SEL_TBL_CTRL(i): %08x\n", sw_r32(RTL838X_PRI_SEL_TBL_CTRL(0))); rtl83xx_setup_default_prio2queue(); /* Enable inner (bit 12) and outer (bit 13) priority remapping from DSCP */ sw_w32_mask(0, BIT(12) | BIT(13), RTL838X_PRI_DSCP_INVLD_CTRL0); /* Set default weight for calculating internal priority, in prio selection group 0 * Port based (prio 3), Port outer-tag (4), DSCP (5), Inner Tag (6), Outer Tag (7) */ v = 3 | (4 << 3) | (5 << 6) | (6 << 9) | (7 << 12); sw_w32(v, RTL838X_PRI_SEL_TBL_CTRL(0)); /* Set the inner and outer priority one-to-one to re-marked outer dot1p priority */ v = 0; for (int p = 0; p < 8; p++) v |= p << (3 * p); sw_w32(v, RTL838X_RMK_OPRI_CTRL); sw_w32(v, RTL838X_RMK_IPRI_CTRL); v = 0; for (int p = 0; p < 8; p++) v |= (dot1p_priority_remapping[p] & 0x7) << (p * 3); sw_w32(v, RTL838X_PRI_SEL_IPRI_REMAP); /* On all ports set scheduler type to WFQ */ for (int i = 0; i <= soc_info.cpu_port; i++) sw_w32(0, RTL838X_SCHED_P_TYPE_CTRL(i)); /* Enable egress scheduler for CPU-Port */ sw_w32_mask(0, BIT(8), RTL838X_SCHED_LB_CTRL(soc_info.cpu_port)); /* Enable egress drop allways on */ sw_w32_mask(0, BIT(11), RTL838X_FC_P_EGR_DROP_CTRL(soc_info.cpu_port)); /* Give special trap frames priority 7 (BPDUs) and routing exceptions: */ sw_w32_mask(0, 7 << 3 | 7, RTL838X_QM_PKT2CPU_INTPRI_2); /* Give RMA frames priority 7: */ sw_w32_mask(0, 7, RTL838X_QM_PKT2CPU_INTPRI_1); } void rtl839x_config_qos(void) { u32 v; struct rtl838x_switch_priv *priv = switch_priv; pr_info("Setting up RTL839X QoS\n"); pr_info("RTL839X_PRI_SEL_TBL_CTRL(i): %08x\n", sw_r32(RTL839X_PRI_SEL_TBL_CTRL(0))); rtl83xx_setup_default_prio2queue(); for (int port = 0; port < soc_info.cpu_port; port++) sw_w32(7, RTL839X_QM_PORT_QNUM(port)); /* CPU-port gets queue number 7 */ sw_w32(7, RTL839X_QM_PORT_QNUM(soc_info.cpu_port)); for (int port = 0; port <= soc_info.cpu_port; port++) { rtl83xx_set_ingress_priority(port, 0); rtl839x_set_scheduling_algorithm(priv, port, WEIGHTED_FAIR_QUEUE); rtl839x_set_scheduling_queue_weights(priv, port, default_queue_weights); /* Do re-marking based on outer tag */ sw_w32_mask(0, BIT(port % 32), RTL839X_RMK_PORT_DEI_TAG_CTRL(port)); } /* Remap dot1p priorities to internal priority, for this the outer tag needs be re-marked */ v = 0; for (int p = 0; p < 8; p++) v |= (dot1p_priority_remapping[p] & 0x7) << (p * 3); sw_w32(v, RTL839X_PRI_SEL_IPRI_REMAP); /* Configure Drop Precedence for Drop Eligible Indicator (DEI) * Index 0: 0 * Index 1: 2 * Each indicator is 2 bits long */ sw_w32(2 << 2, RTL839X_PRI_SEL_DEI2DP_REMAP); /* Re-mark DEI: 4 bit-fields of 2 bits each, field 0 is bits 0-1, ... */ sw_w32((0x1 << 2) | (0x1 << 4), RTL839X_RMK_DEI_CTRL); /* Set Congestion avoidance drop probability to 0 for drop precedences 0-2 (bits 24-31) * low threshold (bits 0-11) to 4095 and high threshold (bits 12-23) to 4095 * Weighted Random Early Detection (WRED) is used */ sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(0)); sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(1)); sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(2)); /* Set queue-based congestion avoidance properties, register fields are as * for forward RTL839X_WRED_PORT_THR_CTRL */ for (int q = 0; q < 8; q++) { sw_w32(255 << 24 | 78 << 12 | 68, RTL839X_WRED_QUEUE_THR_CTRL(q, 0)); sw_w32(255 << 24 | 74 << 12 | 64, RTL839X_WRED_QUEUE_THR_CTRL(q, 0)); sw_w32(255 << 24 | 70 << 12 | 60, RTL839X_WRED_QUEUE_THR_CTRL(q, 0)); } } void __init rtl83xx_setup_qos(struct rtl838x_switch_priv *priv) { switch_priv = priv; pr_info("In %s\n", __func__); if (priv->family_id == RTL8380_FAMILY_ID) return rtl838x_config_qos(); else if (priv->family_id == RTL8390_FAMILY_ID) return rtl839x_config_qos(); if (priv->family_id == RTL8380_FAMILY_ID) rtl838x_rate_control_init(priv); else if (priv->family_id == RTL8390_FAMILY_ID) rtl839x_rate_control_init(priv); }