From 949807343300a75b6e7c3e47463f817a7b6bc790 Mon Sep 17 00:00:00 2001 From: Jack Zhu Date: Fri, 12 May 2023 18:28:40 +0800 Subject: [PATCH 082/122] media: admin-guide: Add starfive_camss.rst for Starfive Camera Subsystem Add starfive_camss.rst file that documents the Starfive Camera Subsystem driver which is used for handing image sensor data. Signed-off-by: Jack Zhu --- .../admin-guide/media/starfive_camss.rst | 57 +++++++++++++++++++ .../media/starfive_camss_graph.dot | 16 ++++++ .../admin-guide/media/v4l-drivers.rst | 1 + 3 files changed, 74 insertions(+) create mode 100644 Documentation/admin-guide/media/starfive_camss.rst create mode 100644 Documentation/admin-guide/media/starfive_camss_graph.dot --- /dev/null +++ b/Documentation/admin-guide/media/starfive_camss.rst @@ -0,0 +1,57 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: + +================================ +Starfive Camera Subsystem driver +================================ + +Introduction +------------ + +This file documents the driver for the Starfive Camera Subsystem found on +Starfive JH7110 SoC. The driver is located under drivers/media/platform/ +starfive. + +The driver implements V4L2, Media controller and v4l2_subdev interfaces. +Camera sensor using V4L2 subdev interface in the kernel is supported. + +The driver has been successfully used on the Gstreamer 1.18.5 with +v4l2src plugin. + + +Starfive Camera Subsystem hardware +---------------------------------- + +The Starfive Camera Subsystem hardware consists of: + +- MIPI DPHY Receiver: receives mipi data from a MIPI camera sensor. +- MIPI CSIRx Controller: is responsible for handling and decoding CSI2 protocol + based camera sensor data stream. +- ISP: handles the image data streams from the MIPI CSIRx Controller. +- VIN(Video In): a top-level module, is responsible for controlling power + and clocks to other modules, dumps the input data to memory or transfers the + input data to ISP. + + +Topology +-------- + +The media controller pipeline graph is as follows: + +.. _starfive_camss_graph: + +.. kernel-figure:: starfive_camss_graph.dot + :alt: starfive_camss_graph.dot + :align: center + +The driver has 2 video devices: + +- stf_vin0_wr_video0: capture device for images directly from the VIN module. +- stf_vin0_isp0_video1: capture device for images without scaling. + +The driver has 3 subdevices: + +- stf_isp0: is responsible for all the isp operations. +- stf_vin0_wr: used to dump RAW images to memory. +- stf_vin0_isp0: used to capture images for the stf_vin0_isp0_video1 device. --- /dev/null +++ b/Documentation/admin-guide/media/starfive_camss_graph.dot @@ -0,0 +1,16 @@ +digraph board { + rankdir=TB + n00000001 [label="{{ 0} | stf_isp0\n/dev/v4l-subdev0 | { 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000001:port1 -> n0000000d:port0 + n00000004 [label="{{ 0} | stf_vin0_wr\n/dev/v4l-subdev1 | { 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000004:port1 -> n00000007 [style=bold] + n00000007 [label="stf_vin0_wr_video0\n/dev/video0", shape=box, style=filled, fillcolor=yellow] + n0000000d [label="{{ 0} | stf_vin0_isp0\n/dev/v4l-subdev2 | { 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000000d:port1 -> n00000010 [style=bold] + n00000010 [label="stf_vin0_isp0_video1\n/dev/video1", shape=box, style=filled, fillcolor=yellow] + n00000018 [label="{{ 0} | cdns_csi2rx.19800000.csi-bridge\n | { 1 | 2 | 3 | 4}}", shape=Mrecord, style=filled, fillcolor=green] + n00000018:port1 -> n00000004:port0 [style=dashed] + n00000018:port1 -> n00000001:port0 + n00000028 [label="{{} | imx219 6-0010\n | { 0}}", shape=Mrecord, style=filled, fillcolor=green] + n00000028:port0 -> n00000018:port0 [style=bold] +} --- a/Documentation/admin-guide/media/v4l-drivers.rst +++ b/Documentation/admin-guide/media/v4l-drivers.rst @@ -30,5 +30,6 @@ Video4Linux (V4L) driver-specific docume si470x si4713 si476x + starfive_camss vimc vivid