From 3d74980ca3ba91dae6e84fbc23750e702e71d41a Mon Sep 17 00:00:00 2001 From: Minda Chen Date: Thu, 18 May 2023 19:27:46 +0800 Subject: [PATCH 089/122] phy: starfive: Add JH7110 USB 2.0 PHY driver Add Starfive JH7110 SoC USB 2.0 PHY driver support. USB 2.0 PHY default connect to Cadence USB controller. Signed-off-by: Minda Chen --- drivers/phy/starfive/Kconfig | 11 ++ drivers/phy/starfive/Makefile | 1 + drivers/phy/starfive/phy-jh7110-usb.c | 150 ++++++++++++++++++++++++++ 3 files changed, 162 insertions(+) create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c --- a/drivers/phy/starfive/Kconfig +++ b/drivers/phy/starfive/Kconfig @@ -11,3 +11,14 @@ config PHY_STARFIVE_DPHY_RX Choose this option if you have a StarFive D-PHY in your system. If M is selected, the module will be called phy-starfive-dphy-rx. + +config PHY_STARFIVE_JH7110_USB + tristate "Starfive JH7110 USB 2.0 PHY support" + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + help + Enable this to support the StarFive USB 2.0 PHY, + used with the Cadence USB controller. + If M is selected, the module will be called + phy-jh7110-usb.ko. --- a/drivers/phy/starfive/Makefile +++ b/drivers/phy/starfive/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PHY_STARFIVE_DPHY_RX) += phy-starfive-dphy-rx.o +obj-$(CONFIG_PHY_STARFIVE_JH7110_USB) += phy-jh7110-usb.o --- /dev/null +++ b/drivers/phy/starfive/phy-jh7110-usb.c @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * StarFive JH7110 USB 2.0 PHY driver + * + * Copyright (C) 2023 StarFive Technology Co., Ltd. + * Author: Minda Chen + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB_125M_CLK_RATE 125000000 +#define USB_LS_KEEPALIVE_OFF 0x4 +#define USB_LS_KEEPALIVE_ENABLE BIT(4) + +struct jh7110_usb2_phy { + struct phy *phy; + void __iomem *regs; + struct clk *usb_125m_clk; + struct clk *app_125m; + enum phy_mode mode; +}; + +static void jh7110_usb2_mode_set(struct jh7110_usb2_phy *phy) +{ + unsigned int val; + + if (phy->mode != PHY_MODE_USB_HOST) { + /* Enable the LS speed keep-alive signal */ + val = readl(phy->regs + USB_LS_KEEPALIVE_OFF); + val |= USB_LS_KEEPALIVE_ENABLE; + writel(val, phy->regs + USB_LS_KEEPALIVE_OFF); + } +} + +static int jh7110_usb2_phy_set_mode(struct phy *_phy, + enum phy_mode mode, int submode) +{ + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); + + switch (mode) { + case PHY_MODE_USB_HOST: + case PHY_MODE_USB_DEVICE: + case PHY_MODE_USB_OTG: + break; + default: + return -EINVAL; + } + + if (mode != phy->mode) { + dev_dbg(&_phy->dev, "Changing phy to %d\n", mode); + phy->mode = mode; + jh7110_usb2_mode_set(phy); + } + + return 0; +} + +static int jh7110_usb2_phy_init(struct phy *_phy) +{ + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); + int ret; + + ret = clk_set_rate(phy->usb_125m_clk, USB_125M_CLK_RATE); + if (ret) + return ret; + + ret = clk_prepare_enable(phy->app_125m); + if (ret) + return ret; + + return 0; +} + +static int jh7110_usb2_phy_exit(struct phy *_phy) +{ + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); + + clk_disable_unprepare(phy->app_125m); + + return 0; +} + +static const struct phy_ops jh7110_usb2_phy_ops = { + .init = jh7110_usb2_phy_init, + .exit = jh7110_usb2_phy_exit, + .set_mode = jh7110_usb2_phy_set_mode, + .owner = THIS_MODULE, +}; + +static int jh7110_usb_phy_probe(struct platform_device *pdev) +{ + struct jh7110_usb2_phy *phy; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->usb_125m_clk = devm_clk_get(dev, "125m"); + if (IS_ERR(phy->usb_125m_clk)) + return dev_err_probe(dev, PTR_ERR(phy->usb_125m_clk), + "Failed to get 125m clock\n"); + + phy->app_125m = devm_clk_get(dev, "app_125m"); + if (IS_ERR(phy->app_125m)) + return dev_err_probe(dev, PTR_ERR(phy->app_125m), + "Failed to get app 125m clock\n"); + + phy->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->regs)) + return dev_err_probe(dev, PTR_ERR(phy->regs), + "Failed to map phy base\n"); + + phy->phy = devm_phy_create(dev, NULL, &jh7110_usb2_phy_ops); + if (IS_ERR(phy->phy)) + return dev_err_probe(dev, PTR_ERR(phy->phy), + "Failed to create phy\n"); + + phy_set_drvdata(phy->phy, phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id jh7110_usb_phy_of_match[] = { + { .compatible = "starfive,jh7110-usb-phy" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, jh7110_usb_phy_of_match); + +static struct platform_driver jh7110_usb_phy_driver = { + .probe = jh7110_usb_phy_probe, + .driver = { + .of_match_table = jh7110_usb_phy_of_match, + .name = "jh7110-usb-phy", + } +}; +module_platform_driver(jh7110_usb_phy_driver); + +MODULE_DESCRIPTION("StarFive JH7110 USB 2.0 PHY driver"); +MODULE_AUTHOR("Minda Chen "); +MODULE_LICENSE("GPL");